Beretta PX4 Storm Pistol
Beretta Px4 Storm Pistol
Bob Dunlap is a renowned expert on many firearms, including Beretta pistols, rifles and shotguns. He is a big fan of Beretta, both for their history, design and execution of their products.
For those of you looking for practical instruction in how to get your Px4 pistol completely apart, clean, troubleshoot, make common repairs, and get your gun back together and operating properly with none of those pesky and embarrassing leftover parts, you have come to the right place. Bob uses a cut away gun so that you can actually see how the internal parts function and their relationship to one another. This will help you to understand the design and function of these guns.
If you want the long course, on the design, function and extensive repair of this gun and firearms in general, look into our basic 108 hour Professional Gunsmith course.
Among the items covered in this DVD are:
- Beretta is the oldest company in the world that has been in continuous operation to the present. It began operations 500 years ago with an order for 185 arquebus barrels from the Arsenal of Venice and is still owned and operated by the Beretta family.
- The Px4 is made in Italy, not the American plant in Accokeek, MD where the military and civilian M4 and M92 Berettas are produced.
- Rotating locking system is shown and explained
- The loading, chambering, ignition, extraction, ejection, reloading cycle is shown and described
- A cut-away gun is used to illustrate and demonstrate the guns design and function, including the trigger/fire control system.
- How the drawbar, sear, hammer, and disconnector operate and interact is shown and demonstrated
- Loading function is demonstrated
- Feeding and ejection and the operation of the ejector are shown
- How a controlled feed extractor works, and why it is superior to push feed
- Trigger/Drawbar described as weak point and reason given
- Slide removal is shown and the improvement over the system of the similar Glock
- Loose breach described, shown, problems and cure explained
- Extractor hook design lauded and explained
- Manufacturer of the magazine identified and its high quality product mentioned
- Firing pin blocking safety identified and operation shown
- Ejector identified and operation shown
- Slide stop identified and operation shown
- Operation of the single action system shown
- Function and operation of the sear trip lever shown
- How the slide mounted thumb safety prevents the hammer from striking the firing pin when the safety is on
- Safety design and operation
- Ken Brooks demonstrates complete disassembly, special attention given to parts that should not be disassembled under normal circumstances & why
- Noted are parts under spring tension so they are not launched into Never Never Land
- Use of a digital camera or cell phone camera during the disassembly is very useful during the reassembly process
- Magazine removal and disassembly
- Discussion of AGI Disassembly/Reassembly method shown and its reason for use
- Slide removal and disassembly, DA/SA gun includes removal of slide mounted safety
- Frame disassembly
- Fire control assembly removes as a unit, its disassembly shown
- AGI cleaning & lubrication methods shown, along with the reasons for their use
- After cleaning, dry with air gun, a hair dryer, or in the oven on Warm ~185-200 degrees (metal parts ONLY)
- What oil AGI likes to lube the gun with during assembly
- Making sure you have no parts left over
- In many cases the order of assembly is important, Ken shows you the correct order
- Assembly is in reverse order of disassembly
- Getting the right pieces in the right places, the easiest way possible
- Using the proper tool to help you line up the parts to accept their pins
Fitting the extractor to snap over
- Advantage of mechanically turned off safety over spring turn on
- Problems with trigger bar turning safety off
- How DAO gun sear can wear
If you noticed how often the terms explanation, and demonstration are used, you may be getting some idea of why this course is a must-have for any Px4 Storm pistol owner, or someone who intends to be.
How much does your Professional Course cost? The answer can be found in our intro pack. We recommend to anyone considering our Professional Course that they get the Introduction to Gunsmithing Packet as this packet includes a video with a sample gunsmithing lesson. It also includes an Enrollment Form that lists the costs of each Course level available as well as the material covered in each level.
Do I have to pay $7 s/h on each retail video? No, we discount shipping on multiple video orders. The new website calculates shipping based on weight and destination. In most cases, the actual shipping is less than listed in the catalog.
Is there a time limit to complete your course? No, our course is self-paced. As you complete sections of the course and submit your tests, we provide certification of completion for that portion of the course.
Can I become certified by taking your retail courses? Answers vary. If you are intending to purchase all the videos in our Law Enforcement Armorer's Course, for example, as long as you buy the test separately you can obtain a Certification as a Law Enforcement Armorer once you complete the testing successfully. Otherwise you would need to purchase one of our certified professional courses in order to obtain a profession Gunsmithing certificate.
What does your Professional Gunsmithing Course Introductory Lesson cover?The Introductory Lesson is one hour and includes complete information on how to get started Gunsmithing. You will also learn how to insure reliable auto-pistol feeding and how to prevent jams, checking and adjusting "range" on Smith and Wesson revolvers, how a gas system works on a Colt AR-15, AR-7 trigger repairs, timing and understanding cartridge stops of a Remington 870 and much more!
Are your Courses guaranteed? Yes! The American Gunsmithing Institute is proud to offer a 100%, "Bulletproof Guarantee." We are so sure of the quality of our Courses and products that you may return any item purchased directly from AGI for a full refund (less shipping) for up to 90 days after purchase date. Defective DVDs and videos will be replaced for up to 1 year. The only question we will ask is: "How did we fail you?"
Does AGI offer other Certified Courses aside from the Professional Gunsmithing Course? Yes. We also offer a Certified Machine Shop Course, complete with Lathe, Mill and general Machine Shop instruction. Additionally AGI offers a Certified Welding Course and a Certified Locksmithing Course.
What do the Disassembly/Reassembly Courses cover? AGI offers D/R Courses that clearly demonstrate the complete process of disassembly and reassembly step-by-step. The Courses use close-up views to provide comprehensive instruction. Each DVD Video Manual covers one specific model or family of firearms and is indexed to help the user quickly find the information that they are looking for. At the price of only $19.97 each (plus s/h), these video manuals are must have support information for anyone who owns one of these firearms.
What do the Armorer's Courses cover?AGI's Armorer's Courses teach you how to disassemble, maintain, repair and reassemble your choice of the 51 guns featured. These videos are packed with exclusive information and are equal to a complete Factory Armorer's Course! While our Disassembly/Reassembly Courses contain invaluable information, our Armorer's Courses contain so much more. Master Gunsmith and AGI Instructor Robert "Bob" Dunlap explains design and function using exclusive factory cutaway firearm models, giving you close-up details of the internal functions you would not otherwise be able to see. All AGI Armorer's Course DVDs include a FREE printable schematic!
Are your Instructors experienced in their fields? Absolutely. Master Gunsmith and AGI Senior Instructor Robert "Bob" Dunlap is a widely respected authority in the firearm industry and spent over 35 years as the senior instructor at Lassen College's internationally known Gunsmithing School. Master Gunsmith Gene Shuey is a world class custom gun builder, former world class competitive shooter and current trainer specializing in 1911 and Glock pistols, IPSC limited and open class guns, and high-end custom rifles. Darrell Holland is a well known custom rifle builder, writer and lecturer who is always inventing new performance shooting products. Ken Brooks is a graduate of the renowned Gunsmithing program at Lassen College and continues his journey by working full time for Bob Dunlap. Gene Kelly is the President of AGI and the Gun Club of America. He graduated from Lassen College's Gunsmithing program and worked as a Professional Gunsmith prior to founding AGI. T.R. Graham is a NRA Certified Pistol Instructor and is a known authority, author and Gunsmith specializing in Glocks and other handguns. Master Armorer John Bush is an AGI Instructor and a consultant to manufacturers and importers of military firearms, and is certified as an Expert Witness in firearm cases.