AGI Armorer’s Course for Savage Arms 10-116 Series Bolt Action Rifles
$49.95
Darrell Holland does his first Armorers Course (although certainly not his first AGI course by any means) on the Savage 110 series of rifles. These bargain priced rifles may not be the most classic looking bolt guns with their prominent barrel collar nut, but that same part helps make them about the most accurate, out of the box, guns this side of much pricier full custom guns (such as Darrells own.) All of the guns from the model 10 to the 116 (if the number starts 11, it is a long action, if its 1, 10 or 12, it is a short action) are covered in this course, as well as barrel and caliber swaps and the new AccuTrigger.
If you want the quick course on how to get this superbly accurate, innovative, and value priced rifle apart, back together, and operating as intended, then this course is for you.
Click the video play button on the image for more information about AGI’s Armorer’s Courses.
Darrell Holland does his first Armorers Course (although certainly not his first AGI course by any means) on the Savage 110 series of rifles. These bargain priced rifles may not be the most classic looking bolt guns with their prominent barrel collar nut, but that same part helps make them about the most accurate, out of the box, guns this side of much pricier full custom guns (such as Darrells own.) All of the guns from the model 10 to the 116 (if the number starts 11, it is a long action, if its 1, 10 or 12, it is a short action) are covered in this course, as well as barrel and caliber swaps and the new AccuTrigger.
If you want the quick course on how to get this superbly accurate, innovative, and value priced rifle apart, back together, and operating as intended, then this course is for you (if you want the long course, look into our basic 108 hour Professional Gunsmith Course.)
Among the items covered are:
History
Discussion of the period after World War II and Remingtons new rifles (721 & 722), and Winchesters re-invigoration of its pre-64 model 70. Savage was way behind the new rifle curve
Savage gives the new rifle project to former savage employee and WW II Browning M2 Project Manager, Nicholas Brewer in 1955
Brewer and Savage engineer Ed Stark had gun ready for production by 1956, but Brewer past away from cancer that same year, and never saw the rifle go into production
In 1964, Savage hires Bob Greenleaf to refine the rifle
Model was originally called the model 98, but the name was changed to the 110, in .270 Winchester and .30/06, and it was priced at $109.75
Savage was among the first to make left-handed rifles, it was so popular that sales were initially 4-1, left handed vs. right
During the 70s development continued, and the single shot model 12 Varmint/Target was introduced
Design & Function
Savages unique baffle design of the bolt seals off the bolt lug raceways in the event of case rupture
Mr. Brewers multiple piece bolt design is shown
Extractor cam and cocking stud in the rear of the bolt are discussed
The sliding tang safety, unique at the time
The rifles single position feed magazine shown and advantages discussed
The sliding plate extractor is shown, a Brewer design later copied by Winchester
Advantage of the small diameter ejector plunger discussed
Why the small amount of play in the bolt head is a good thing
Advantages of the same diameter front and rear receiver rings discussed
Why the socket head receiver screws are a good idea
The famous Savage barrel nut, Brewers baby, its multiple advantages
The tabbed recoil lug washer is shown
No feed rails in the receiver, where have they gone
Why every gun company added anti-bind lugs and slots to their bolt guns after WW II and Savages take on the feature
How the new AccuTrigger works, or how you lawyer proof a gun that will allow you to adjust the pull down to 1 pound from the factory! They even give you a tool to do it with, what a concept
The feeding and extraction/ejection cycle detailed
How much pick up by the bolt face you need for proper feeding
Where the ejector plunger should not go
How the tang safety works, and what to do (and not do) if it is not working properly
The model 12 shown and why the right hand gun has its loading and ejection port on the left side! No, it is not a mistake
Target features such as heavy barrel and thicker recoil lug shown
Why the H & S stock produces such good accuracy
What Savage could eliminate and save a few bucks on the manufacturing cost
Target optimized differences in the model 12s AccuTrigger, why the blade is orange, and why you have to close the bolt slowly
How the primary extraction cam and the cocking stud operate
Darrells unique take on the steps southpaws need to take to get more guns designed for them
Disassembly
Extensive disassembly performed
Short and long action screws, they are not interchangeable
How the blind magazine box comes out, and it is not easy
How to adjust the magazine spring
Complete disassembly and explanation of the operation of the AccuTrigger
Bolt disassembly and final review
Cleaning & Lubrication
AGI cleaning & lubrication methods shown, along with the reasons for their use
Reassembly
Making sure, you have no parts left over, and everything is facing the right direction
Special lubrication points
Special Bonus– Headspacing and Changing Barrels
How to keep from scratching the new barrel
Making your headspace go gauge work as a Savage headspace gauge
How to make sure your hand loaded cartridges have not had, the shoulders bumped back
If you noticed how often the terms “explanation” and “demonstration” are used, you may be getting some idea of why this course is necessary for any Savage 10 series rifle owner, or someone who intends to be.
View a sample of the content of this course below.
Weight
0.25 lbs
Dimensions
7.56 × 5.44 × 0.63 in
Reviews
There are no reviews yet.
Be the first to review “AGI Armorer’s Course for Savage Arms 10-116 Series Bolt Action Rifles” Cancel reply
Reviews
There are no reviews yet.